Merge branch 'jwdev' of http://192.168.1.220:10080/Amoy2/wlyy2.0.config

# Conflicts:
#	application.yml
#	svr-base.yml
#	svr-patient.yml

ag-basic.yml

@@ -0,0 +1,163 @@
server:
  port: ${server.ag-basic-port}
spring:
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    max-active: 100
    max-idle: 100 #最大空闲连接
    min-idle: 10 #最小空闲连接
    validation-query-timeout: 20
    log-validation-errors: true
    validation-interval: 60000 #避免过度验证，保证验证不超过这个频率——以毫秒为单位。如果一个连接应该被验证，但上次验证未达到指定间隔，将不再次验证。
    validation-query: SELECT 1 #SQL 查询， 用来验证从连接池取出的连接， 在将连接返回给调用者之前。 如果指定， 则查询必须是一个SQL SELECT 并且必须返回至少一行记录
    test-on-borrow: true #指明是否在从池中取出连接前进行检验， 如果检验失败， 则从池中去除连接并尝试取出另一个。注意： 设置为true 后如果要生效，validationQuery 参数必须设置为非空字符串
    test-on-return: true #指明是否在归还到池中前进行检验 注意： 设置为true 后如果要生效validationQuery 参数必须设置为非空字符串
    idle-timeout: 20000
    connection-test-query: SELECT 1
    num-tests-per-eviction-run: 100 #在每次空闲连接回收器线程(如果有)运行时检查的连接数量，最好和maxActive
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
  redis:
    database: 0 # Database index used by the connection factory.
    timeout: 0 # Connection timeout in milliseconds.
    pool:
      max-active: 8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
      max-idle: 8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
      max-wait: -1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
      min-idle: 1 # Target for the minimum number of idle connections to maintain in the pool. This settings only has an effect if it is positive.
hystrix:
  command:
    default:
      execution:
        timeout:
          enabled: true
        isolation:
          thread:
            timeoutInMilliseconds: 4800000
#Ribbon
ribbon:
  ReadTimeout: 600000
  ConnectTimeout: 600000
  SocketTimeout: 600000
  MaxAutoRetries: 3
  MaxAutoRetriesNextServer: 0
  eureka:
     enabled: true
#  sleuth:
#    sampler:
#      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10%
zuul:
  retryable: true
  config-priority: false
  ignored-services: '*'
  sensitive-headers:
  routes:
    svr-iot:
      path: /cityihealth/iot/**
      serviceId: svr-iot
    svr-base:
      path: /cityihealth/base/**
      serviceId: svr-base
    svr-authentication:
      path: /cityihealth/auth/**
      serviceId: svr-authentication
    svr-healthy-house:
      path: /cityihealth/healthyHouse/**
      serviceId: svr-healthy-house
    svr-patient:
      path: /cityihealth/patient/**
      serviceId: svr-patient
    svr-internet-hospital:
      path: /hospital/**
      serviceId: svr-internet-hospital
    svr-internet-hospital-entrance:
      path: /hospitalEntrance/**
      serviceId: svr-internet-hospital-entrance
---
spring:
  profiles: jwdev
  datasource:
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: root
    password: jkzlehr
  redis:
    host: 172.19.103.88 # Redis server host.
    port: 6379 # Redis server port.
#    password: jkzl_ehr
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址
---
spring:
  profiles: jwtest
  datasource:
     url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
     username: root
     password: jkzlehr
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
---
spring:
  profiles: jwprod
  datasource:
    url: jdbc:mysql://172.16.1.42/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: im
    password: 2oEq3Kf7
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址
---
## 眼科医院配置
spring:
  profiles: jwOracleProd
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@192.168.20.55:1521:orcl
    username: system
    password: hxyk9573
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
  redis:
    host: 192.168.33.198 # Redis server host.
    port: 6380 # Redis server port.
    password: Kb6wKDQP1W4
---
## 心脏中心配置
spring:
  profiles: xzprod
  datasource:
    url: jdbc:mysql://192.168.103.155:7306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: jkzl
    password: jzkl@2020
  redis:
    host: 192.168.103.158 # Redis server host.
    port: 6380 # Redis server port.
    password: q4YaQemf
---
## 卫计委配置
spring:
  profiles: xmjwprod
  datasource:
    url: jdbc:mysql://59.61.92.90:9409/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
  redis:
    host: 59.61.92.90 # Redis server host.
    port: 9206  # Redis server port.
    password: jkzlehr

application.yml

@@ -1,50 +1,73 @@
##公共配置
server:
  svr-dashboard-port: 9010
  web-gateway-port: 8088
  ag-basic-port: 10001
  svr-base-port: 10020
  svr-patient-port: 10021
  svr-internet-hospital-port: 10022
  svr-internet-hospital-entrance-port: 10023
  svr-zipkin-port: 9411
  svr-dashboard-port: 9010
  web-gateway-port: 8088
  svr-wlyy-port: 10090
  svr-quota-port: 10030
  svr-logServer-port: 9411
  svr-iot-port: 10050
  svr-authentication-port: 10260
  context-path:
    svr-dashboard-context-path: /
    svr-web-gateway-context-path: /
    svr-base-context-path: /
    svr-patient-context-path: /
    svr-wlyy-context-path: /
    svr-quota-context-path: /
    svr-logServer-context-path: /
    svr-configurations-context-path: /
    svr-iot-context-path: /
#Actuator
management:
  security:
    enabled: false
#发现服务
eureka:
  client:
    healthcheck:
      enabled: true #启动监控检查
  instance:
    #eurika使用IP不使用host
    prefer-ip-address: true
    #定制化在eurika中显示的名称
    ##instance-id: ${spring.application.name}:${spring.application.instance_id:${server.port}}
    instance-id: ${spring.cloud.client.ipAddress}:${server.port}
    leaseRenewalIntervalInSeconds: 30 ##心跳时间 默认30秒 一般不修改
#Hystrix
#hystrix:
#  command:
#    default:
#      execution:
#        timeout:
#          enabled: false
#        isolation:
#          thread:
#            timeoutInMilliseconds: 240000
#Ribbon
#ribbon:
#  ReadTimeout: 600000
#  ConnectTimeout: 600000
#  MaxAutoRetries: 3
#  MaxAutoRetriesNextServer: 0
#  eureka:
#     enabled: true
#Zuul serviceid 模式配置zuulhost 无效.启用ribbon
#zuul:
#  host:
#    socket-timeout-millis: 300000
#    connect-timeout-millis: 300000
#Spring
spring:
  jmx:
    enabled: false
  jpa:
    database-platform: org.hibernate.dialect.MySQL5Dialect
    hibernate.dialect: org.hibernate.dialect.MySQL5Dialect
    show-sql: false
  mvc:
    throw-exception-if-no-handler-found: true
#未知
yihu:
  admin:
    client:
      advice:
        http: true
management:
  security:
    enabled: false
endpoints:
  logfile:
    enabled: true
#发现服务
eureka:
  client:
    healthcheck:
      enabled: false #监控检查
    serviceUrl:
      defaultZone: http://jw:jkzl@192.168.120.210:8761/eureka/
  instance:
    prefer-ip-address: false
    instance-id: ${spring.cloud.client.ipAddress}:${server.port}

svr-authentication.yml

@@ -0,0 +1,171 @@
server:
  port: 10260
spring:
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    max-active: 100
    max-idle: 100 #最大空闲连接
    min-idle: 10 #最小空闲连接
    validation-query-timeout: 20
    log-validation-errors: true
    validation-interval: 60000 #避免过度验证，保证验证不超过这个频率——以毫秒为单位。如果一个连接应该被验证，但上次验证未达到指定间隔，将不再次验证。
    validation-query: SELECT 1 #SQL 查询， 用来验证从连接池取出的连接， 在将连接返回给调用者之前。 如果指定， 则查询必须是一个SQL SELECT 并且必须返回至少一行记录
    test-on-borrow: true #指明是否在从池中取出连接前进行检验， 如果检验失败， 则从池中去除连接并尝试取出另一个。注意： 设置为true 后如果要生效，validationQuery 参数必须设置为非空字符串
    test-on-return: true #指明是否在归还到池中前进行检验 注意： 设置为true 后如果要生效validationQuery 参数必须设置为非空字符串
    idle-timeout: 20000
    connection-test-query: SELECT 1
    num-tests-per-eviction-run: 100 #在每次空闲连接回收器线程(如果有)运行时检查的连接数量，最好和maxActive
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
  redis:
    database: 0 # Database index used by the connection factory.
    timeout: 0 # Connection timeout in milliseconds.
    pool:
      max-active: 8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
      max-idle: 8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
      max-wait: -1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
      min-idle: 1 # Target for the minimum number of idle connections to maintain in the pool. This settings only has an effect if it is positive.
user:
  autoUnlockTime: 5  #账户锁定后,自动解锁时间  以分钟计算
  reflashFailedCountTime: 5 #将失败次数重置为0
  tryLoginTimes: 5 #失败重试次数
fast-dfs:
  tracker-server: 192.0.33.26:22122 #服务器地址
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
  http:
    tracker-http-port: 80
    anti-steal-token: no
    secret-key: FastDFS1234567890
  pool: #连接池大小
    init-size: 5
    max-size: 20
    wait-time: 500
---
spring:
  profiles: jwdev
  ##发现服务
  datasource:
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: ssgg
    password: ssgg@jkzl2019
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
# i健康用户信息接口，开放出来给互联网医院登录同步用户信息用
iHealth:
  user-info-uri: http://ehr.yihu.com/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
---
spring:
  profiles: jwtest
  datasource:
    url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: root
    password: jkzlehr
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
  ##发现服务
## i健康用户信息接口，开放出来给互联网医院登录同步用户信息用
iHealth:
  user-info-uri: http://ehr.yihu.com/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
---
spring:
  profiles: jwprod
  datasource:
    url: jdbc:mysql://172.16.1.42/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: im
    password: 2oEq3Kf7
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
  ##发现服务
iHealth:
  user-info-uri: http://www.xmtyw.cn/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://192.0.33.26:22122
##眼科医院
---
spring:
  profiles: jwOracleProd
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@192.168.20.55:1521:orcl
    username: system
    password: hxyk9573
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
  redis:
    host: 192.168.33.198 # Redis server host.
    port: 6380 # Redis server port.
    password: Kb6wKDQP1W4
  ##发现服务
iHealth:
  user-info-uri: http://www.xmtyw.cn/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://192.0.33.26:22122
---
## 心脏中心
spring:
  profiles: xzprod
  datasource:
    url: jdbc:mysql://192.168.103.155/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: jzkl
    password: jzkl@2020
  redis:
    host: 192.168.103.158 # Redis server host.
    port: 6380 # Redis server port.
    password: q4YaQemf
  ##发现服务
iHealth:
  user-info-uri: http://www.xmtyw.cn/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://192.168.103.159:22122
---
## 卫计委
spring:
  profiles: xmjwprod
  datasource:
    url: jdbc:mysql://59.61.92.90:9409/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
  redis:
    host: 59.61.92.90 # Redis server host.
    port: 9206  # Redis server port.
    password: jkzlehr
  ##发现服务
iHealth:
  user-info-uri: http://www.xmtyw.cn/wlyy/iHealth/userInfo
zhongshanHospital:
  user-info-uri: http://laptop-u738dn2p:10023/mqsdk/getUserInfoByOpenid
fastDFS:
  fastdfs_file_url: http://192.168.103.159:22122

svr-base.yml

@@ -1,7 +1,6 @@
##如果有配置服务的话，远程服务器和本地服务器配置不一致的情况下，优先远程的为主
#通用的配置不用区分环境变量
server:
  port: ${server.svr-base-port}
  context-path: ${server.context-path.svr-base-context-path}
spring:
  datasource:
@@ -21,79 +20,162 @@ spring:
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
#  sleuth:
#    sampler:
#      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10%
  redis:
    database: 0 # Database index used by the connection factory.
    password: # Login password of the redis server.
    timeout: 120000 # 连接超时时间（毫秒） 60秒
    pool:
      max-active: 20 # 连接池最大连接数（使用负值表示没有限制）
      max-wait: -1  # 连接池最大阻塞等待时间（使用负值表示没有限制）
      max-idle: 20  # 连接池中的最大空闲连接
      min-idle: 5  # 连接池中的最小空闲连接
  mail:
    default-encoding: UTF-8
#端口
    port: 25
#协议
    protocol: smtp
    properties.mail.smtp.auth: true
    properties.mail.smtp.starttls.enable: true
    properties.mail.smtp.starttls.required: true
    timeout: 1000
    host: smtp.163.com
#发送者的邮箱密码
    password: xmijk181016jkzl
#发送者的邮箱账号
    username: i_jiankang@163.com
es:
  index:
    servicePackLog: base_service_package_log
  type:
    servicePackLog: base_service_package_log
fast-dfs:
  tracker-server: 172.19.103.54:22122 #服务器地址
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
  http:
    tracker-http-port: 80
    anti-steal-token: no
    secret-key: FastDFS1234567890
  pool: #连接池大小
    init-size: 5
    max-size: 20
    wait-time: 500
hibernate:
  dialect: org.hibernate.dialect.MySQL5Dialect
  show_sql: true
#  ejb:
#    naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy #springJPA使用驼峰式(hibernate4以下使用)
  physical_naming_strategy: org.springframework.boot.orm.jpa.hibernate.SpringPhysicalNamingStrategy #springJPA使用驼峰式(hibernate5以上使用)
  implicit_naming_strategy: org.hibernate.boot.model.naming.ImplicitNamingStrategyLegacyHbmImpl
yihu:
  admin:
    client:
      advice:
        sql: true
configDefault: # 默认配置
  saasId: xmjkzl_saasId
---
spring:
  profiles: jwdev
  datasource:
#    url: jdbc:mysql://172.17.110.160/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    username: ssgg
#    password: ssgg
    url: jdbc:mysql://172.19.103.77/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
yihu:
  admin:
    client:
      server:
        ip: 192.168.131.102
        port: 8082
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.19.103.45:9300,172.19.103.68:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.19.103.45:9200,http://172.19.103.68:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.19.103.87:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
#    password: jkzl_ehr
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/
# 短信发送地址
jw:
  smsUrl: http://svr-base:10020/sms_gateway/send
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
---
spring:
  profiles: jwtest
  datasource:
    url: jdbc:mysql://172.17.110.160/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
yihu:
  admin:
    client:
      server:
        ip: 192.168.131.102
        port: 8082
    password: ssgg@jkzl2019
#    url: jdbc:mysql://172.19.103.77/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    username: root
#    password: 123456
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.19.103.45:9300,172.19.103.68:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.19.103.45:9200,http://172.19.103.68:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.19.103.87:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
---
spring:
  profiles: jwprod
  datasource:
    url: jdbc:mysql://172.19.103.77/jw2?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
yihu:
  admin:
    client:
      server:
        ip: 192.168.131.102
        port: 8082
    url: jdbc:mysql://192.0.33.27:3306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: im
    password: 2oEq3Kf7
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 192.0.33.26:9200 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://192.0.33.26:9300
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01

svr-configurations.yml

@@ -1,17 +0,0 @@
server:
  context-path: ${server.context-path.svr-configurations-context-path}
---
spring:
  profiles: jwdev
---
spring:
  profiles: jwtest
---
spring:
  profiles: jwprod

svr-internet-hospital-entrance.yml

@@ -0,0 +1,172 @@
#通用的配置不用区分环境变量
server:
  port: ${server.svr-internet-hospital-entrance-port}
spring:
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    max-active: 50
    max-idle: 50 #最大空闲连接
    min-idle: 10 #最小空闲连接
    validation-query-timeout: 20
    log-validation-errors: true
    validation-interval: 60000 #避免过度验证，保证验证不超过这个频率——以毫秒为单位。如果一个连接应该被验证，但上次验证未达到指定间隔，将不再次验证。
    validation-query: SELECT 1 #SQL 查询， 用来验证从连接池取出的连接， 在将连接返回给调用者之前。 如果指定， 则查询必须是一个SQL SELECT 并且必须返回至少一行记录
    test-on-borrow: true #指明是否在从池中取出连接前进行检验， 如果检验失败， 则从池中去除连接并尝试取出另一个。注意： 设置为true 后如果要生效，validationQuery 参数必须设置为非空字符串
    test-on-return: true #指明是否在归还到池中前进行检验 注意： 设置为true 后如果要生效validationQuery 参数必须设置为非空字符串
    idle-timeout: 30000
    connection-test-query: SELECT 1
    num-tests-per-eviction-run: 50 #在每次空闲连接回收器线程(如果有)运行时检查的连接数量，最好和maxActive
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
fast-dfs:
  tracker-server: 172.26.0.110:22122 #服务器地址
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
  http:
    tracker-http-port: 80
    anti-steal-token: no
    secret-key: FastDFS1234567890
  pool: #连接池大小
    init-size: 5
    max-size: 20
    wait-time: 500
configDefault: # 默认配置
  saasId: xmjkzl_saasId
express:
  sf_url: http://bsp-oisp.sf-express.com/bsp-oisp/sfexpressService
  sf_code: JKZL
  sf_check_word: QkeIfIvQdheqIv2cVSgAUnBU29lfNbVk
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
---
spring:
  profiles: jwdev
  datasource:
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg@jkzl2019
# mq 是否获取his数据，true代表获取演示数据，false代表获取his真实数据
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.26.0.105:3000/
  data_base_name: im_internet_hospital
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
---
spring:
  profiles: jwtest
  datasource:
    url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg@jkzl2019
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.26.0.105:3000/
  data_base_name: im_internet_hospital
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
---
spring:
  profiles: jwprod
  datasource:
    url: jdbc:mysql://192.0.33.27:3306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: im
    password: 2oEq3Kf7
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://172.16.1.34
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.16.1.42:3000/
  data_base_name: im
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/
## 眼科医院
---
spring:
  profiles: jwOracleProd
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@192.168.20.55:1521:orcl
    username: system
    password: hxyk9573
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.16.1.42:3000/
  data_base_name: im
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/
---
spring:
  profiles: xmjwprod
  datasource:
    url: jdbc:mysql://59.61.92.90:9409/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.16.1.42:3000/
  data_base_name: im
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/

svr-internet-hospital.yml

@@ -0,0 +1,587 @@
#通用的配置不用区分环境变量
server:
  port: ${server.svr-internet-hospital-port}
spring:
  aop:
    proxy-target-class: true
  datasource:
    max-active: 200
    max-idle: 200 #最大空闲连接
    min-idle: 10 #最小空闲连接
    validation-query-timeout: 20
    log-validation-errors: true
    validation-interval: 60000 #避免过度验证，保证验证不超过这个频率——以毫秒为单位。如果一个连接应该被验证，但上次验证未达到指定间隔，将不再次验证。
    validation-query: SELECT 1 #SQL 查询， 用来验证从连接池取出的连接， 在将连接返回给调用者之前。 如果指定， 则查询必须是一个SQL SELECT 并且必须返回至少一行记录
    test-on-borrow: true #指明是否在从池中取出连接前进行检验， 如果检验失败， 则从池中去除连接并尝试取出另一个。注意： 设置为true 后如果要生效，validationQuery 参数必须设置为非空字符串
    test-on-return: true #指明是否在归还到池中前进行检验 注意： 设置为true 后如果要生效validationQuery 参数必须设置为非空字符串
    idle-timeout: 20000
    connection-test-query: SELECT 1
    num-tests-per-eviction-run: 200 #在每次空闲连接回收器线程(如果有)运行时检查的连接数量，最好和maxActive
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
  http:
    multipart:
      max-file-size: 30MB
#      location: D:/work/soft_dev/IdeaWorkSpace/wlyy2.0/svr/svr-patient/temp_file/
#      resolve-lazily: true
  redis:
    database: 0 # Database index used by the connection factory.
    password: # Login password of the redis server.
    timeout: 120000 # 连接超时时间（毫秒） 60秒
    pool:
      max-active: 20 # 连接池最大连接数（使用负值表示没有限制）
      max-wait: -1  # 连接池最大阻塞等待时间（使用负值表示没有限制）
      max-idle: 20  # 连接池中的最大空闲连接
      min-idle: 5  # 连接池中的最小空闲连接
  mail:
    default-encoding: UTF-8
#端口
    port: 25
#协议
    protocol: smtp
    properties.mail.smtp.auth: true
    properties.mail.smtp.starttls.enable: true
    properties.mail.smtp.starttls.required: true
    host: smtp.163.com
#发送者的邮箱密码
    password: xmijk181016jkzl
#发送者的邮箱账号
    username: i_jiankang@163.com
es:
  index:
    servicePackLog: base_service_package_log
  type:
    servicePackLog: base_service_package_log
fast-dfs:
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
  http:
    tracker-http-port: 80
    anti-steal-token: no
    secret-key: FastDFS1234567890
  pool: #连接池大小
    init-size: 5
    max-size: 20
    wait-time: 500
configDefault: # 默认配置
  saasId: xmjkzl_saasId
express:
  sf_url: http://bsp-oisp.sf-express.com/bsp-oisp/sfexpressService
  sf_code: JKZL
  sf_check_word: QkeIfIvQdheqIv2cVSgAUnBU29lfNbVk
---
spring:
  profiles: jwdev
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: root
    password: jkzlehr
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.26.0.115:9300,172.26.0.115:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.26.0.112:9200,http://172.26.0.112:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.26.0.116:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
#    password: jkzl_ehr
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
fast-dfs:
  tracker-server: 172.26.0.110:22122 #服务器地址
# 短信发送地址
jw:
  smsUrl: http://svr-base:10020/sms_gateway/send
myFamily:
  qrCodeFailurTime: 2
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.26.0.105:3000/
  data_base_name: im_internet_hospital
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://172.26.0.112:9200
  tHost: 172.26.0.112:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
---
spring:
  profiles: jwtest
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: ssgg
    password: ssgg@jkzl2019
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 192.0.33.26:9200 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://192.0.33.26:9300
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/
fast-dfs:
  tracker-server: 192.0.33.26:22122 #服务器地址
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段  # todo 待配置
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP #todo 待配置
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://192.0.33.103:3000/
  data_base_name: im
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://172.26.0.112:9200
  tHost: 172.26.0.112:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
---
spring:
  profiles: jwprod
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    url: jdbc:mysql://192.0.33.27:3306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: im
    password: 2oEq3Kf7
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 192.0.33.26:9200 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://192.0.33.26:9300
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
fastDFS:
  fastdfs_file_url: http://192.0.33.26:8888/
fast-dfs:
  tracker-server: 192.0.33.26:22122 #服务器地址
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段  # todo 待配置
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP #todo 待配置
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.16.1.42:3000/
  data_base_name: im
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://172.26.0.112:9200
  tHost: 172.26.0.112:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
---
spring:
  profiles: jwOracleTest
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@172.26.0.141:1521:helowin
    username: normal
    password: normal
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
#    url: jdbc:mysql://172.19.103.77/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    username: root
#    password: 123456
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.26.0.115:9300,172.26.0.115:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.26.0.112:9200,http://172.26.0.112:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.26.0.116:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
fastDFS:
  fastdfs_file_url: http://172.26.0.110:8888/
fast-dfs:
  tracker-server: 172.26.0.110:22122 #服务器地址
wechat:
  id: 97ed8a0a-4f07-4b85-ab02-b716c611a464  # base库中,wx_wechat 的id字段
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.26.0.105:3000/
  data_base_name: im_internet_hospital
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://172.26.0.112:9200
  tHost: 172.26.0.112:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
---
spring:
  profiles: jwOracleProd
  ## ==眼科医院 数据库========================================================================
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@192.168.20.55:1521:orcl
    username: system
    password: hxyk9573
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 192.168.33.198:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://192.168.33.198:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.26.0.116:61616
    user: admin
    password: admin
  redis:
    host: 192.168.33.198 # Redis server host.
    port: 6380 # Redis server port.
    password: Kb6wKDQP1W4
fastDFS:
  fastdfs_file_url: http://192.168.33.198:8888/
fast-dfs:
  tracker-server: 192.168.33.198:22122 #服务器地址
wechat:
  id: 97ed8a0a-4f07-4b85-ab02-b716c611a464  # base库中,wx_wechat 的id字段
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: true
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.26.0.105:3000/
  data_base_name: im_internet_hospital
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://192.168.33.198:9200
  tHost: 192.168.33.198:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
##==眼科医院 数据库end=======================================================================
---
##==心脏中心 ===============================================================================
spring:
  profiles: xzprod
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    url: jdbc:mysql://192.168.103.155:7306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: jzkl
    password: jzkl@2020
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 192.168.103.153:9200 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://192.168.103.153:9300
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 192.168.103.158 # Redis server host.
    port: 6380 # Redis server port.
    password: q4YaQemf
fastDFS:
  fastdfs_file_url: http://192.168.103.159:8888/
fast-dfs:
  tracker-server: 192.168.103.159:22122 #服务器地址
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段  # todo 待配置
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP #todo 待配置
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://172.16.1.42:3000/
  data_base_name: im
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://172.26.0.112:9200
  tHost: 172.26.0.112:9300
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 0
wlyy:
  url: http://www.xmtyw.cn/wlyytest/
---
##==厦门卫计委 ===============================================================================
spring:
  profiles: xmjwprod
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    url: jdbc:mysql://59.61.92.90:9409/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 10.95.22.155:9200 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://10.95.22.155:9300
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 59.61.92.90 # Redis server host.
    port: 9206  # Redis server port.
    password: jkzlehr
fastDFS:
  fastdfs_file_url: http://192.168.103.159:8888/
fast-dfs:
  tracker-server: 192.168.103.159:22122 #服务器地址
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段  # todo 待配置
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP #todo 待配置
myFamily:
  qrCodeFailurTime: 2
# mq 是否获取his数据，flag代表获取演示数据，false代表获取his真实数据
demo:
  flag: false
hospital:
  url: https://wx.xmzsh.com
  mqUser: JKZL
  mqPwd: 123456
  SourceSysCode: S60
  TargetSysCode: S01
im:
  im_list_get: http://27.150.190.148:16000/
  data_base_name: im
# 上传文件临时路径配置
FileTempPath:
  upload_temp_path : /var/local/temp
  image_path : /var/local/upload/images
  voice_path : /var/local/upload/voice
  chat_file_path : /var/local/upload/chat
es:
  index:
    Statistics: hlw_quota_test
  type:
    Statistics: hlw_quota_test
  host:  http://59.61.92.90:9065
  tHost: 59.61.92.90:9066
  clusterName: jkzl
  securityUser: lion:jkzlehr
#是否开启i健康接口 0关闭，1开启
testPattern:
  sign: 1
wlyy:
  url: http://www.xmtyw.cn/wlyy/

svr-iot.yml

@@ -27,14 +27,12 @@ spring:
  data:
    elasticsearch: #ElasticsearchProperties
      cluster-name: jkzl #默认即为elasticsearch  集群名
      cluster-nodes: 172.19.103.45:9300,172.19.103.68:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
      local: false #是否本地连接
      properties: # Additional properties used to configure the client.
        enable: true
  # JEST (Elasticsearch HTTP client) (JestProperties)
  elasticsearch:
    jest:
      uris: http://172.19.103.45:9200,http://172.19.103.68:9200
#      uris: http://172.19.103.68:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
@@ -51,7 +49,6 @@ hibernate:
    naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy
fast-dfs:
  tracker-server: 172.19.103.54:22122 #服务器地址
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
@@ -82,13 +79,38 @@ yihu:
---
spring:
  profiles: jwdev
  datasource:
    url: jdbc:mysql://172.26.0.204:3306/xmiot?useUnicode=true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg@jkzl2019
  elasticsearch:
    cluster-name: jkzl #默认即为elasticsearch  集群名
    cluster-nodes: 172.26.0.203:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    jest:
      uris: http://172.26.0.202:9200
  wlyy:
    url: http://www.xmtyw.cn/wlyy/
fast-dfs:
  tracker-server: 172.26.0.200:22122 #服务器地址
fastDFS:
  fastdfs_file_url: http://172.26.0.200:22122/
---
spring:
  profiles: dev
  datasource:
    url: jdbc:mysql://172.19.103.77:3306/xmiot?useUnicode=true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
    url: jdbc:mysql://172.26.0.204:3306/xmiot?useUnicode=true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg@jkzl2019
  elasticsearch:
    cluster-name: jkzl #默认即为elasticsearch  集群名
    cluster-nodes: 172.26.0.203:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    jest:
      uris: http://172.26.0.202:9200
fast-dfs:
  tracker-server: 172.19.103.54:22122 #服务器地址
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/
  fastdfs_file_url: http://172.26.0.200:22122/
yihu:
  admin:
@@ -104,6 +126,13 @@ spring:
    url: jdbc:mysql://172.19.103.77:3306/xmiot?useUnicode=true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  elasticsearch:
    cluster-name: jkzl #默认即为elasticsearch  集群名
    cluster-nodes: 172.19.103.45:9300,172.19.103.68:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    jest:
      uris: http://172.19.103.45:9200,http://172.19.103.68:9200
fast-dfs:
  tracker-server: 172.19.103.54:22122 #服务器地址
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/
@@ -121,6 +150,13 @@ spring:
    url: jdbc:mysql://172.19.103.77:3306/xmiot?useUnicode=true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  elasticsearch:
    cluster-name: jkzl #默认即为elasticsearch  集群名
    cluster-nodes: 172.19.103.45:9300,172.19.103.68:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    jest:
      uris: http://172.19.103.45:9200,http://172.19.103.68:9200
fast-dfs:
  tracker-server: 172.19.103.54:22122 #服务器地址
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/

svr-patient.yml

@@ -1,7 +1,6 @@
##如果有配置服务的话，远程服务器和本地服务器配置不一致的情况下，优先远程的为主
#通用的配置不用区分环境变量
server:
  port: ${server.svr-patient-port}
  context-path: ${server.context-path.svr-patient-context-path}
spring:
  datasource:
@@ -22,56 +21,160 @@ spring:
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
  http:
    multipart:
      max-file-size: 5MB
      location: D:/work/soft_dev/IdeaWorkSpace/wlyy2.0/svr/svr-patient/temp_file/
      resolve-lazily: true
hibernate:
  dialect: org.hibernate.dialect.MySQL5Dialect
  show_sql: true
  ejb:
    naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy #springJPA使用驼峰式
  redis:
    database: 0 # Database index used by the connection factory.
    password: # Login password of the redis server.
    timeout: 120000 # 连接超时时间（毫秒） 60秒
    pool:
      max-active: 20 # 连接池最大连接数（使用负值表示没有限制）
      max-wait: -1  # 连接池最大阻塞等待时间（使用负值表示没有限制）
      max-idle: 20  # 连接池中的最大空闲连接
      min-idle: 5  # 连接池中的最小空闲连接
  mail:
    default-encoding: UTF-8
#端口
    port: 25
#协议
    protocol: smtp
    properties.mail.smtp.auth: true
    properties.mail.smtp.starttls.enable: true
    properties.mail.smtp.starttls.required: true
    host: smtp.163.com
#发送者的邮箱密码
    password: xmijk181016jkzl
#发送者的邮箱账号
    username: i_jiankang@163.com
es:
  index:
    servicePackLog: base_service_package_log
  type:
    servicePackLog: base_service_package_log
fast-dfs:
  tracker-server: 172.26.0.110:22122 #服务器地址
  connect-timeout: 2 #链接超时时间
  network-timeout: 30
  charset: ISO8859-1 #编码
  http:
    tracker-http-port: 80
    anti-steal-token: no
    secret-key: FastDFS1234567890
  pool: #连接池大小
    init-size: 5
    max-size: 20
    wait-time: 500
configDefault: # 默认配置
  saasId: xmjkzl_saasId
---
spring:
  profiles: jwdev
  datasource:
    url: jdbc:mysql://172.19.103.77/jw2?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    url: jdbc:mysql://172.17.110.160/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    username: ssgg
#    password: ssgg
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
    password: jkzlehr
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.26.0.115:9300,172.26.0.115:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.26.0.112:9200,http://172.26.0.112:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.26.0.116:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
#    password: jkzl_ehr
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址
fastDFS:
  fastdfs_file_url: http://172.26.0.110:22122/
# 短信发送地址
jw:
  smsUrl: http://svr-base:10020/sms_gateway/send
myFamily:
  qrCodeFailurTime: 2
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP
---
spring:
  profiles: jwtest
  datasource:
    url: jdbc:mysql://172.19.103.77/jw2?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
    url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: ssgg
    password: ssgg@jkzl2019
#    url: jdbc:mysql://172.19.103.77/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
#    username: root
#    password: 123456
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 172.26.0.115:9300,172.26.0.115:9300 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://172.26.0.112:9200,http://172.26.0.112:9200
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://172.26.0.116:61616
    user: admin
    password: admin
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
fastDFS:
  fastdfs_file_url: http://172.26.0.110:22122/
wechat:
  id: 97ed8a0a-4f07-4b85-ab02-b716c611a464  # base库中,wx_wechat 的id字段
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP
myFamily:
  qrCodeFailurTime: 2
---
spring:
  profiles: jwprod
  profiles: prod
  datasource:
    url: jdbc:mysql://172.19.103.77/jw2?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: root
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
    url: jdbc:mysql://59.61.92.90:9069/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true
    username: wlyy
    password: jkzlehr@123
  elasticsearch:
    cluster-name: jkzl #集群名 默认elasticsearch
    cluster-nodes: 59.61.92.90:9066,59.61.92.90:9068 #配置es节点信息，逗号分隔，如果没有指定，则启动ClientNode
    client-transport-sniff: false
    jest:
      uris: http://59.61.92.90:9065,http://59.61.92.90:9067
      connection-timeout: 60000 # Connection timeout in milliseconds.
      multi-threaded: true # Enable connection requests from multiple execution threads.
  activemq:
    broker-url: tcp://59.61.92.90:9103
    user: jkzl
    password: jkzlehr
  redis:
    host: 192.168.131.172 # Redis server host.
    port: 6379 # Redis server port.
fastDFS:
  fastdfs_file_url: http://172.19.103.54:80/
wechat:
  id: d24d1367-7f4f-43af-910e-a0a43799e040  # base库中,wx_wechat 的id字段  # todo 待配置
# 短信验证码发送的客户端标识,居民端
sms:
  clientId: EwC0iRSrcP #todo 待配置
myFamily:
  qrCodeFailurTime: 2

svr-wlyy.yml

@@ -22,7 +22,6 @@ spring:
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
hibernate:
  dialect: org.hibernate.dialect.MySQL5Dialect
  show_sql: true
@@ -41,10 +40,9 @@ spring:
    password: 123456
  zipkin:
    base-url: http://192.168.131.173:${server.svr-logServer-port} #日志追踪的地址
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10%
---
@@ -59,7 +57,7 @@ spring:
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10%
---
@@ -74,4 +72,4 @@ spring:
  sleuth:
    sampler:
      percentage: 1.0 ##采用需要的请求的百分比 默认是0.1 即 10%
      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10%

svr-logServer.yml

@@ -1,9 +1,6 @@
##如果有配置服务的话，远程服务器和本地服务器配置不一致的情况下，优先远程的为主
server:
  port: ${server.svr-logServer-port}
  context-path: /
  port: ${server.svr-zipkin-port}
---
spring: