wlyy2.0.config/ag-basic.yml

server:

  port: ${server.ag-basic-port}

spring:
  datasource:
    driver-class-name: com.mysql.jdbc.Driver
    max-active: 100
    max-idle: 100 #最大空闲连接.
    min-idle: 10 #最小空闲连接
    validation-query-timeout: 20
    log-validation-errors: true
    validation-interval: 60000 #避免过度验证，保证验证不超过这个频率——以毫秒为单位。如果一个连接应该被验证，但上次验证未达到指定间隔，将不再次验证。
    validation-query: SELECT 1 #SQL 查询， 用来验证从连接池取出的连接， 在将连接返回给调用者之前。 如果指定， 则查询必须是一个SQL SELECT 并且必须返回至少一行记录
    test-on-borrow: true #指明是否在从池中取出连接前进行检验， 如果检验失败， 则从池中去除连接并尝试取出另一个。注意： 设置为true 后如果要生效，validationQuery 参数必须设置为非空字符串
    test-on-return: true #指明是否在归还到池中前进行检验 注意： 设置为true 后如果要生效validationQuery 参数必须设置为非空字符串
    idle-timeout: 20000
    connection-test-query: SELECT 1
    num-tests-per-eviction-run: 100 #在每次空闲连接回收器线程(如果有)运行时检查的连接数量，最好和maxActive
    test-while-idle: true #指明连接是否被空闲连接回收器(如果有)进行检验，如果检测失败，则连接将被从池中去除
    min-evictable-idle-time-millis: 3600000 #连接池中连接，在时间段内一直空闲，被逐出连接池的时间(1000*60*60)，以毫秒为单位
    time-between-eviction-runs-millis: 300000 #在空闲连接回收器线程运行期间休眠的时间值,以毫秒为单位，一般比minEvictableIdleTimeMillis小
  redis:
    database: 0 # Database index used by the connection factory.
    timeout: 0 # Connection timeout in milliseconds.
    pool:
      max-active: 8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
      max-idle: 8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
      max-wait: -1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
      min-idle: 1 # Target for the minimum number of idle connections to maintain in the pool. This settings only has an effect if it is positive.

hystrix:
  command:
    default:
      execution:
        timeout:
          enabled: true
        isolation:
          thread:
            timeoutInMilliseconds: 4800000

#Ribbon
ribbon:
  ReadTimeout: 600000
  ConnectTimeout: 600000
  SocketTimeout: 600000
  MaxAutoRetries: 3
  MaxAutoRetriesNextServer: 0
  eureka:
     enabled: true

#  sleuth:
#    sampler:
#      percentage: 1.0 #采用需要的请求的百分比 默认是0.1 即 10
zuul:
  retryable: true
  config-priority: false
  ignored-services: '*'
  sensitive-headers:
  routes:
    svr-iot:
      path: /cityihealth/iot/**
      serviceId: svr-iot
    svr-base:
      path: /cityihealth/base/**
      serviceId: svr-base
    svr-authentication:
      path: /cityihealth/auth/**
      serviceId: svr-authentication
    svr-healthy-house:
      path: /cityihealth/healthyHouse/**
      serviceId: svr-healthy-house
    svr-patient:
      path: /cityihealth/patient/**
      serviceId: svr-patient
    svr-internet-hospital:
      path: /hospital/**
      serviceId: svr-internet-hospital
    svr-internet-hospital-entrance:
      path: /hospitalEntrance/**
      serviceId: svr-internet-hospital-entrance

---
spring:
  profiles: jwdev
  datasource:
    url: jdbc:mysql://172.26.0.114/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: root
    password: jkzlehr
  redis:
    host: 172.19.103.88 # Redis server host.
    port: 6379 # Redis server port.
#    password: jkzl_ehr
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址

---
spring:
  profiles: jwtest
  datasource:
     url: jdbc:mysql://172.26.0.104/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
     username: root
     password: jkzlehr
  redis:
    host: 172.26.0.253 # Redis server host.
    port: 6379 # Redis server port.
---
spring:
  profiles: qytest
  datasource:
     url: jdbc:mysql://172.26.0.54/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
     username: root
     password: jkzlehr
  redis:
    host: 172.26.0.53 # Redis server host.
    port: 6379 # Redis server port.
    password: Kb6wKDQP1W4
---
spring:
  profiles: jwprod
  datasource:
    url: jdbc:mysql://172.16.1.42/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: im
    password: 2oEq3Kf7
  redis:
    host: 192.0.33.26 # Redis server host.
    port: 6390 # Redis server port.
    password: Kb6wKDQP1W4
#  zipkin:
#    base-url: http://localhost:9411 #日志追踪的地址

---
## 眼科医院配置
spring:
  profiles: jwOracleProd
  datasource:
    driver-class-name: oracle.jdbc.driver.OracleDriver
    url: jdbc:oracle:thin:@10.10.10.16:1521/rac
    username: HLWYY
    password: Xmykzxhlwyy963
  jpa:
    properties:
      hibernate:
        dialect: org.hibernate.dialect.Oracle10gDialect
        show_sql: true
    database: oracle
  redis:
    host: 192.168.33.198 # Redis server host.
    port: 6380 # Redis server port.
    password: Kb6wKDQP1W4
---
## 心脏中心配置
spring:
  profiles: xzprod
  datasource:
    url: jdbc:mysql://172.16.100.240:7306/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: jkzl
    password: jkzl@2020
  redis:
    host: 172.16.100.240 # Redis server host.
    port: 6380 # Redis server port.
    password: q4YaQemf
---
## 卫计委配置
spring:
  profiles: xmjwprod
  datasource:
    url: jdbc:mysql://59.61.92.90:9409/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
  redis:
    host: 59.61.92.90 # Redis server host.
    port: 9206  # Redis server port.
    password: jkzlehr
---
## 卫计委配置-内网
spring:
  profiles: xmjwlocal
  datasource:
    url: jdbc:mysql://10.95.22.191:3406/base?useUnicode:true&characterEncoding=utf-8&autoReconnect=true&useSSL=false
    username: wlyy
    password: qY#j2n5O
  redis:
    host: 10.95.22.142 # Redis server host.
    port: 6380  # Redis server port.
    password: jkzlehr